[RE-wrenches] pressure switch question

jay peltz jay at asis.com
Thu Apr 19 18:19:01 PDT 2012


Hi Todd,

Yes pressure switches do work, but its a long process to adjust.

Thats why I was looking for a more direct accurate way to do it without spending $500.

jay

peltz power
On Apr 19, 2012, at 10:41 AM, toddcory at finestplanet.com wrote:

> oh, well if they have two basic settings (one for high water and one for low) you could wire two pressure switches in with a toggle switch to transfer back and forth between the two. just an idea. these switches are pretty bombproof.
>  
> todd
>  
>  
>  
>  
> On Thursday, April 19, 2012 7:33am, "Jay Peltz" <jay at asis.com> said:
> 
> Hi Todd
> I was looking for something a bit easier for the customer to adjust.
> Jay
> Peltz power
> 
> Sent from my iPhone
> 
> On Apr 18, 2012, at 10:20 AM, toddcory at finestplanet.com wrote:
> 
> why not just use a well pump pressure switch?
>  
> todd
>  
>  
>  
>  
>  
> On Wednesday, April 18, 2012 8:29am, "jay peltz" <jay at asis.com> said:
> 
> > HI All,
> > 
> > I'm looking for a contact pressure gauge with built in switches.
> > 
> > ( this is an example..http://www.indumart.com/P84.pdf)
> > 
> > I am looking to turn on/off a hydro with pressure increase/decrease.
> > 
> > But I just can't seem to find one to buy for anything less than $600.
> > 
> > SPECs:
> > switching 24vdc
> > less than 1 amp.
> > 
> > Any suggestions?
> > 
> > thanks,
> > 
> > jay
> > 
> > peltz power
> > 
> > 
> > _______________________________________________
> > List sponsored by Home Power magazine
> > 
> > List Address: RE-wrenches at lists.re-wrenches.org
> > 
> > Options & settings:
> > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> > 
> > List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> > 
> > List rules & etiquette:
> > www.re-wrenches.org/etiquette.htm
> > 
> > Check out participant bios:
> > www.members.re-wrenches.org
> > 
> >
> 
> 
> 
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120419/c1d41e83/attachment-0004.html>


More information about the RE-wrenches mailing list