[RE-wrenches] Best elevated ground mount

[James Reismiller]

Hi Folks,

   Responding to the best way to protect wires on a Multi-Pole Mount, we
used galvanized 7/8” Unistrut attached to the bottom side of rack
horizontally and top module to bottom module vertically for series
connections between modules.  The horizontal strut had the side benefit of
keeping each column aligned with the next as there was now a physical
connection between columns.  Our AHJ liked it, although it was above 8’, so
was not technically required.  I agree that racking makers could do a better
job on this wire protection issue.

 

Regards,

James Reismiller

NABCEP Certified Solar PV Installer®

Abundant Solar

541-231-8772

CCB#175919

Logo2007-for-outlook

www.abundantsolar.com <http://www.abundantsolar.com/abundantsolar/Home.html>


 

”I’d put my money on the sun and solar energy. What a source of power! I
hope we don’t have to wait until oil and coal run out before we tackle
that.”-Thomas Edison

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20121222/1b99ee15/attachment-0003.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 2481 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20121222/1b99ee15/attachment-0006.png>