[RE-wrenches] Pilot Hole Template

Jason Szumlanski jason at fafcosolar.com
Thu Dec 13 15:34:59 PST 2012


Unfortunately, these don't work for us in hurricane-land unless we want to
get really close spacing. We generally need to hit structural members in
Southwest Florida. We have used Ecofasten bases on flat roofs with metal
decking, but wind uplift is still an issue in most cases.

*Jason Szumlanski** *

*Fafco Solar*

On Thu, Dec 13, 2012 at 11:37 AM, Mark Dickson <Mark at oasismontana.com>wrote:

> ** ** ** ** ** ** **
>
> Sounds like you already have the equipment.  But perhaps next time
> consider DPW’s Easy Feet.  They are made to tech-screw right into the
> decking without having to hit the truss.  Come pre-made with EPDM.  Just
> snap a line, set and screw.  Obviously you will need to do some math to
> make sure your decking material is substantial as well as anchored well to
> the blue board.  I have not used them yet, but will be putting up 20kW next
> month and will report back.  That being said, anybody else have experience
> to report with them?****
>
> ** **
>
> Best regards,****
>
> ** **
>
> **Mark Dickson**,****
>
> NABCEP Certified Solar PV Installer ™****
>
> Oasis Montana Inc.****
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20121213/d8123350/attachment-0003.html>


More information about the RE-wrenches mailing list