[RE-wrenches] Ballasted Roof Racking Recommendations?

[Bill Hoffer]

Ryan

I do not think that they have a 30 degree option, but I have been pretty
impressed with Dynoraxx <http://dynoraxx.com/>tool-less approach and using
fiberglass non-conductive material ( read no grounding of racking).  Now
all we need is a fiberglass non-conducting module frame!

Bill Hoffer

On Fri, Aug 31, 2012 at 12:17 PM, Dana Brandt <dana at ecotechenergy.com>wrote:

> We just did a system on 10 degree AET and liked it. I think they have a 30
> degree option. I'd be worried about inter-row shading, though.
>
> The DPW POWER-FAB BRM has more flexibility with row spacing, but I found
> it to be pretty expensive.
>
> Dana
>
> Dana Brandt
> Ecotech Energy Systems, LLC
> www.ecotechenergy.com
> dana at ecotechenergy.com
> 360.318.7646
>
>
> On Tue, Aug 28, 2012 at 1:56 PM, Glenn Burt <glenn.burt at glbcc.com> wrote:
>
>> Hi Ryan,****
>>
>> ** **
>>
>> We have used the AET Rayport stainless steel ballasted racking system on
>> dozens of installations and have been quite satisfied with the light
>> ballast required (all open racking), integral module grounding, lightweight
>> of materials (pressed stainless steel) and quickness of assembly.****
>>
>> ** **
>>
>> http://aetenergy.com/products/RAYPORT-B-solar-mount-solution****
>>
>> ** **
>>
>> Glenn Burt****
>>
>> glb, Consulting Company****
>>
>> ** **
>>
>> *From:* re-wrenches-bounces at lists.re-wrenches.org [mailto:
>> re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *Ryan Harkins
>> *Sent:* Tuesday, August 28, 2012 2:32 PM
>> *To:* RE-wrenches
>> *Subject:* [RE-wrenches] Ballasted Roof Racking Recommendations?****
>>
>> ** **
>>
>> Anyone have recommendations for a ballasted roof racking manufacturer?
>>  Tilts of 30-degrees or more would be best.  ****
>>
>> ** **
>>
>> *Ryan Harkins**
>> NABCEP Certified Solar PV Installer /
>> Project Manager*
>>
>>
>>
>> ****
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Bill Hoffer PE
NABCEP Certified Solar PV Installer™
Sunergy Engineering Services PLLC
2504 Columbia Ave NW
East Wenatchee WA 98802-3941
SunEngSer at gmail.com Cell:(509)679-6165
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120831/69381a0a/attachment-0003.html>