[RE-wrenches] Ballasted Roof Racking Recommendations?

Dana Brandt dana at ecotechenergy.com
Fri Aug 31 12:17:21 PDT 2012


We just did a system on 10 degree AET and liked it. I think they have a 30
degree option. I'd be worried about inter-row shading, though.

The DPW POWER-FAB BRM has more flexibility with row spacing, but I found it
to be pretty expensive.

Dana

Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com
dana at ecotechenergy.com
360.318.7646


On Tue, Aug 28, 2012 at 1:56 PM, Glenn Burt <glenn.burt at glbcc.com> wrote:

> Hi Ryan,****
>
> ** **
>
> We have used the AET Rayport stainless steel ballasted racking system on
> dozens of installations and have been quite satisfied with the light
> ballast required (all open racking), integral module grounding, lightweight
> of materials (pressed stainless steel) and quickness of assembly.****
>
> ** **
>
> http://aetenergy.com/products/RAYPORT-B-solar-mount-solution****
>
> ** **
>
> Glenn Burt****
>
> glb, Consulting Company****
>
> ** **
>
> *From:* re-wrenches-bounces at lists.re-wrenches.org [mailto:
> re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *Ryan Harkins
> *Sent:* Tuesday, August 28, 2012 2:32 PM
> *To:* RE-wrenches
> *Subject:* [RE-wrenches] Ballasted Roof Racking Recommendations?****
>
> ** **
>
> Anyone have recommendations for a ballasted roof racking manufacturer?
>  Tilts of 30-degrees or more would be best.  ****
>
> ** **
>
> *Ryan Harkins**
> NABCEP Certified Solar PV Installer /
> Project Manager*
>
>
>
> ****
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120831/3fd373ee/attachment-0003.html>


More information about the RE-wrenches mailing list