[RE-wrenches] Finding ground faults
Darryl Thayer
daryl_solar at yahoo.com
Wed May 23 16:44:08 PDT 2012
I sure do not like the way the X brand installed their charge controller, Also the code says that all strings must open if one string is faulted. your breaker does this up to 4 strings.
DT
________________________________
From: Steve Higgins <shiggins at outbackpower.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Wednesday, May 23, 2012 2:18 PM
Subject: Re: [RE-wrenches] Finding ground faults
From what I understand, future controllers from Outback Power will incorporate the Ground Fault detection into the controller.
Steve Higgins
Sales Application Engineering Mgr
Direct 360-618-4313
Outback Power Technologies
5917 195th Street NE Arlington, Washington 98223
________________________________
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of William Miller
Sent: Wednesday, May 23, 2012 11:22 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Finding ground faults
Steve:
IMHO, a brilliant suggestion.
William Miller
At 11:19 AM 5/23/2012, you wrote:
Steve,
>
>It would be appropriate for the GFDI to have 80-amp rated contacts that do not have an over-current trip mechanism. IMHO, the fact that they can trip on over-current and unnecessarily interrupt the dc system bond is a serious design flaw.
>
>
>Kent Osterberg
Blue Mountain Solar, Inc. www.bluemountainsolar.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120523/f3fbf6ce/attachment-0003.html>
More information about the RE-wrenches
mailing list