[RE-wrenches] pressure switch question
Jay Peltz
jay at asis.com
Thu Apr 19 07:33:03 PDT 2012
Hi Todd
I was looking for something a bit easier for the customer to adjust.
Jay
Peltz power
Sent from my iPhone
On Apr 18, 2012, at 10:20 AM, toddcory at finestplanet.com wrote:
> why not just use a well pump pressure switch?
>
> todd
>
>
>
>
>
> On Wednesday, April 18, 2012 8:29am, "jay peltz" <jay at asis.com> said:
>
> > HI All,
> >
> > I'm looking for a contact pressure gauge with built in switches.
> >
> > ( this is an example..http://www.indumart.com/P84.pdf)
> >
> > I am looking to turn on/off a hydro with pressure increase/decrease.
> >
> > But I just can't seem to find one to buy for anything less than $600.
> >
> > SPECs:
> > switching 24vdc
> > less than 1 amp.
> >
> > Any suggestions?
> >
> > thanks,
> >
> > jay
> >
> > peltz power
> >
> >
> > _______________________________________________
> > List sponsored by Home Power magazine
> >
> > List Address: RE-wrenches at lists.re-wrenches.org
> >
> > Options & settings:
> > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> >
> > List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> >
> > List rules & etiquette:
> > www.re-wrenches.org/etiquette.htm
> >
> > Check out participant bios:
> > www.members.re-wrenches.org
> >
> >
>
>
>
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120419/a622dd75/attachment-0003.html>
More information about the RE-wrenches
mailing list