[RE-wrenches] pressure switch question
toddcory at finestplanet.com
toddcory at finestplanet.com
Wed Apr 18 10:20:06 PDT 2012
why not just use a well pump pressure switch?
todd
On Wednesday, April 18, 2012 8:29am, "jay peltz" <jay at asis.com> said:
> HI All,
>
> I'm looking for a contact pressure gauge with built in switches.
>
> ( this is an example..http://www.indumart.com/P84.pdf)
>
> I am looking to turn on/off a hydro with pressure increase/decrease.
>
> But I just can't seem to find one to buy for anything less than $600.
>
> SPECs:
> switching 24vdc
> less than 1 amp.
>
> Any suggestions?
>
> thanks,
>
> jay
>
> peltz power
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120418/dbb07189/attachment-0003.html>
More information about the RE-wrenches
mailing list