[RE-wrenches] Gen start
Maverick Brown [Maverick Solar]
maverick at mavericksolar.com
Mon Feb 27 09:53:12 PST 2012
After the OB AGS starts the Genny, check the last page of the AGS menu for the status / event code. The Mate manual has a table of codes for why it started.
Also, Magnum has a neat stand alone AGS that I have used with great success.
Thank you,
Maverick
Maverick Brown
BSEET, NABCEP Certified Solar PV Installer ®
President & CEO
Maverick Solar Enterprises, Inc.
Office: 512-919-4493
Cell: 512-460-9825
Sent from an iPhone.
On Feb 26, 2012, at 2:02 PM, penobscotsolar at midmaine.com wrote:
> Hi all,
> I have a customer I picked up in Culebra that has a previously
> installed PV system. His Outback AGS programming is wacky, with the gen
> starting and running whenever it feels like it and with no rhyme nor
> reason. I have defaulted and reprogrammed many times with the same
> results. While I know it is likely an outdated s/w version, I would
> really like to find something that is more foolproof....
> Is there a quality, reliable, simple to program and reprogram AGS out
> there. Something that I can set a start voltage and stop voltage and be
> done with it. His system now works beautifully except for the AGS and I
> would like to remedy this quickly.
>
> Thanks for suggestions.
> Daryl
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list