[RE-wrenches] 10 Degree Ballast Racking--Recommendations

[Glenn Burt]

We have been using the AET RayPort on the last few jobs. Much like the
RapidRac in design, but made of stainless steel.

Goes together quickly. Looks good, easy grounding. Slight drawback is
walkability between rows is a little more tricky.

http://aetenergy.com/products/

 

YMMV

 

Glenn

 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Orion
Thornton
Sent: Tuesday, February 21, 2012 8:13 PM
To: RE-wrenches
Subject: [RE-wrenches] 10 Degree Ballast Racking--Recommendations

 

Hi Wrenches,

 

I was hoping to get a little feedback on what folks are installing and what
they prefer for 10° tilt—fully ballasted racking systems.  So far we have
worked with SunPower T10, Unirac RapidRac, and PanelClaw.  There has been
positive feedback from our installation for the PanelClaw system and
SunPower T10, but I would be curious to know some other good options, taking
into consideration design support, ease of installation, and grounding
integration.

 

Thanks in advance for any insights.

 

 

 

Orion Thornton

Independent Power Systems

NABCEP Certified Solar PV Installer

(Office) 406.587.5295

www.solarips.com

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120221/250265c2/attachment-0003.html>