[RE-wrenches] Battery Experience
Ken Schaal
Ken at commonwealthsolar.com
Thu Feb 9 04:24:12 PST 2012
We have used Deka wet and sealed, AGM and Gel, since 1999 and never had a premature failure.
I have a set of 8D AGM's in my own system.
The local factory warehouse is responsive to our needs.
Ken Schaal
CommonWealth Solar
----- Original Message -----
From: Larry Crutcher,Starlight Solar Power Systems
To: wes kennedy ; RE-wrenches
Sent: Wednesday, February 08, 2012 3:14 PM
Subject: Re: [RE-wrenches] Battery Experience
Wes,
While I don't have experience with the Deka Unigy AGM's, I can tell you that we are experiencing many failures of the 4D, 8D and other 6 and 12 volt Deka AGM batteries. The company will not respond to the problems so we will never sell another Deka or MK (made by Deka) AGM battery.
Larry Crutcher
Starlight Solar Power Systems
(928) 342-9103
On Feb 8, 2012, at 9:02 AM, wes kennedy wrote:
Howdy Gents,
I have a project (high altitude, off grid, 25 kw PV, 9 x SI5048's, multicluster) where I am considering two similar batteries.
The Absolyte GP (GNB 100G17) vs the Deka Unigy II (AVR95-19). Both have similar reported Lifecycle curves, 1200-1300 cycles at 80% DOD.
Any field experience to share? The Deka seems better on paper, larger AH capacity per dollar quoted from my distributor.
Thanks!
-Wes Kennedy
Solar Geek since 1996
303-653-3073
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120209/f155a949/attachment.htm>
More information about the RE-wrenches
mailing list