[RE-wrenches] High PSF Mods?

penobscotsolar at midmaine.com penobscotsolar at midmaine.com
Tue Sep 27 16:18:45 PDT 2011


....and if you're considering a panel for the Bahamas be sure to make sure
they don't void the warranty for a "marine environment"...read the small
print!


> The Canadian Solar CS6P's and SolarWorld 245 Monos are rated to 113 PSF.
> I don't really like the 31MM frame on the SW from a wind/snow load
> perspective. It just seems like there isn't enough aluminum there. But
> who am I to say? They do look great!
>
>
>
> The CS6P-230PX Zep framed module just FEELS like one of the best. The
> ZEP groove frame really adds a bunch of aluminum around the whole
> module. I'm not sure the "X" modules in the CS6P line are 113 PSF, but
> it's worth a look if you are seeking a rock solid frame. Since the
> attachment points are right at the frame perimeter, I would imagine that
> these test out very well.
>
>
>
> Jason Szumlanski
>
> Fafco Solar
>
>
>
>
>
> From: re-wrenches-bounces at lists.re-wrenches.org
> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jeff
> Clearwater
> Sent: Tuesday, September 27, 2011 6:18 PM
> To: RE-wrenches
> Subject: [RE-wrenches] High PSF Mods?
>
>
>
> Hello Again Wise and Knowledgeable,
>
> What's folks favorite modules for high psf ratings?  I know RECS have
> high ratings.  Others?
>
> Thanks!
>
> Jeff
>
> --
> Jeff Clearwater
> Village Power Design
>
> Renewable Energy Consultant
> 32 Years in all Aspects of Renewables
> www.villagepower.com
> skype: jclearwater
> 413-559-9763
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>





More information about the RE-wrenches mailing list