[RE-wrenches] big combiner box

[Marco Mangelsdorf]

Non-stainless steel metallic enclosures anywhere near the ocean are NOT a
good idea.  Gotta get non-metallic.

 

marco

 

Shoals had some nice looking non-metallic boxes at SPI. I'm not sure if
SolarBOS does non-metallic boxes, but I recently used a very good metallic
NEMA4 combiner solution from them. Not sure about your reason for
non-metallic, but I have had good success with SolarBOS boxes (mostly
smaller than you are looking for).

 

Jason Szumlanski

Fafco Solar 

 

 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Steven
Lawrence
Sent: Tuesday, June 07, 2011 3:44 PM
To: re-wrenches at lists.re-wrenches.org
Subject: Re: [RE-wrenches] big combiner box

 

Hi Marco,

Check out Bentek, Shoals, and SolarBOS.  If you're doing thin film, I
suggest looking into the in-line fusing from Shoals.

-Steven

Date: Mon, 6 Jun 2011 13:04:35 -1000

From: "Marco Mangelsdorf" <marco at pvthawaii.com>
To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] big combiner box
Message-ID: <01b201cc249e$1b52ddb0$51f89910$@com>
Content-Type: text/plain; charset="us-ascii"

I'm looking for a 30-circuit combiner in a NEMA4 non-metallic enclosure.



Any suggestions?



Thanks,

marco



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110607/1fce0d25/attachment-0004.html>