[RE-wrenches] 120 volt inverter to 480 3 phase

[Jesse Dahl]

Transformer?  Just watch OCDP and the KVA.

Jesse

Sent from my iPhone

On May 12, 2011, at 6:20 PM, Kristopher Schmid <solman at legacysolar.com> wrote:

> Esteemed wrenches,
> 
> One of my students asked me today how you would (or if you could) connect a 120 volt outback inverter to a 277/480 volt 3 phase service.  I said those three little words that men find so hard to say, "I don't know".  Help, please.
> 
> -- 
> Thanks,
> Kris Schmid
> 
> Legacy Solar, LLC
> 864 Clam Falls Trail
> Frederic, WI 54837
> 715-653-4295
> www.legacysolar.com
> solman at legacysolar.com
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110512/9c9d46da/attachment-0004.html>