[RE-wrenches] Interfacing an Air 403 wind generator
R Ray Walters
ray at solarray.com
Thu May 5 11:47:15 PDT 2011
I've grid tied a few battery based turbines now, both the 403 and Bergey XL1.
You can use a very small sealed battery (180 AH @ 24v), so that would take care of the maintenance issue.
Cost on the other hand doesn't make sense, unless they want some emergency backup capability.
If they don't want backup, give them a trade-in on the AirX equipment towards a GT turbine.
R. Walters
ray at solarray.com
Solar Engineer
On May 5, 2011, at 12:25 PM, Roy Rakobitsch wrote:
> The Air403 would need a battery to operate. It will not work without one,
> so if you are removing all batteries because of inability to maintain
> them, this may not work. If you DO keep a small battery onsite for the
> AIR403 to charge, it can be interfaced to the grid with a battery based
> inverter such as an Outback GVFX of the appropriate voltage for the
> battery. This will most likely prove uneconomical, but it is certainly
> do-able.
>
> Roy Rakobitsch
> NABCEP Certified Small Wind Installer®
> NABCEP Certified Solar PV Installer®
> NYSERDA eligible Small Wind installer
> Wind/PV Design Engineer
> Windsine Inc.
> 631-514-4166
> www.windsine.org
>
> On Thu, May 5, 2011 2:15 pm, Peter Talmage wrote:
>> Hi Dana,
>>
>> The battery and all associated equipment is being totally removed as the
>> folks are now unable to do the required maintenance. They really love the
>> little Air 403 and would like to interface it if at all possible even if
>> it doesn't make economical sense.
>>
>> Peter
>>
>> --- On Thu, 5/5/11, Dana <dana at solarwork.com> wrote:
>>
>> From: Dana <dana at solarwork.com>
>> Subject: [RE-wrenches] Interfacing an Air 403 wind generator
>> To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
>> Date: Thursday, May 5, 2011, 1:32 PM
>>
>> The Air is DC, wouldn’t it just feed the battery bank and  there for
>> less from the PV to the battery bank and therefore more PV to go to the
>> grid tie………  It is a mighty small unit to go to the effort to grid
>> tie unless he has a 18MPH+ yearly wind speed. If he has that much wind go
>> for a SWWP - Skystream wind turbine that is UL listed for grid tie. Â Dana
>> OrzelGreat Solar Works, IncE - dana at solarwork.comV - 970.626.5253F -
>> 970.626.4140C - 970.209.4076web - www.solarwork.com  "Responsible
>> Technologies for Responsible People since 1988"Do not ever believe
>> anything, but seriously trust through action. Â From:
>> re-wrenches-bounces at lists.re-wrenches.org
>> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Peter
>> Talmage
>> Sent: Thursday, May 05, 2011 11:26 AM
>> To: RE-wrenches
>> Subject: [RE-wrenches] Interfacing an Air 403 wind generator  I have a
>> client with an independent power system who is going utility interfaced.
>> We are putting the 24 volt arrays on Ephase inverters. He wants the Air
>> 403 to be interfaced as well. Has anyone done this and if so, how ?Â
>> Thanks
>>
>> Peter Talmage, P.E.
>>
>> Energy and Design Â
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
More information about the RE-wrenches
mailing list