[RE-wrenches] Tar and Gravel Roof Mount

[William Miller]

Eric:

Yeah, hire a roofer!

Actually, 6" DPW Power posts, Oatey flashings and this 
procedure: 
http://millersolar.com/practices/Technical_Procedures/Flat_Overlay/flat_overlay.html

Works with roll and gravel roofs.

Good luck,

William Miller


At 02:08 PM 4/14/2011, you wrote:

>Anyone have experience mounting a tilt up array over a tar and gravel 
>roof? Weatherproofing, best practices for finding rafters, type of 
>standoffs etc. The residential roof in question has over 3" of tar (!) so 
>im thinking 6" stanchion to tilt legs. Any ideas or lessons learned would 
>be helpful.
>
>Thanks,
>
>Eric Thomas
>Solar Epiphany
>Seattle
>NABCEP Certified PV
>WA Electrical Contractor SOLAREL911NR
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 10.0.1204 / Virus Database: 1435/3563 - Release Date: 04/10/11

William Miller
Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110414/52648a3b/attachment-0004.html>