[RE-wrenches] old trace manual

jay peltz jay at asis.com
Fri Dec 2 07:46:12 PST 2011


Hi Howie,

They were most sensitive to peak volts, not rms.

My 2512 manual shows 14.7 as high bulk and 16.1 for eq.
The 2624 should be double that.

jay

peltz power
On Dec 1, 2011, at 9:05 PM, Howie Michaelson wrote:

> Hi All,
> 
> Does anyone know of a link to the old Trace 2624 inverter/Charger (the one
> with the plexiglass front. I believe the model number was U2624, but I'm
> not positive.  I'm trying to remember what the maximum bulk voltage
> setting was on it.  Also wondering how sensitive to lower gennie voltage
> output (113 vAC) the charger was.  How much would that cut down on the
> current output capacity?
> 
> Thanks,
> Howie
> -- 
> Howie Michaelson
> NABCEP Certified Solar PV Installer™
> 
> Catamount Solar, LLC
> Renewable Energy Systems Sales and Service
> VT Solar Electric & Hot Water Incentive Partner
> http://www.CatamountSolar.com
> 802-272-0004
> 
> 
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 




More information about the RE-wrenches mailing list