[RE-wrenches] Metal roofs

[penobscotsolar at midmaine.com]

Ian,
   We have been using this companies products for the last couple of years
on different types of metal roofs with success (so far). Look at the
variety of products they have for different roofing:

http://www.ecofastensolar.com/our-products/eco-series

Daryl DeJoy
NABCEP Certified PV installer
Penobscot Solar Design




> Wrenches.
> I have a nuts and bolts question concerning preferred attachment methods
> on
> metal roofs that do not have standing seams. Obviously any seam presents
> the opportunity to use a product like S-5!, and I have also used their
> product on corrugated roofs. But on roofs with either a hexagonal shaped
> ridge or just a single ridge I have seen products at the shows but have
> slightly less familiarity with them.
> Any thoughts & insight would be very much appreciated.
> Take care,
> Ian
>
> --
> *Ian Eastman *| Installation/Project Management
> *GO SOLAR!*
> *Cell: 307.413.6789*  •  *ian at creativeenergies.biz*
> * **Creative Energies*
>  *Victor, ID *office 208.354.3001
> Lander, WY office*  *307.332.3410* <ian at creativeenergies.biz>
> *Salt Lake City, UT office 801.487.6489
> * *www.CreativeEnergies.biz <http://www.creativeenergies.biz/>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>