[RE-wrenches] High Voltage MPPT units
Darryl Thayer
daryl_solar at yahoo.com
Sun Nov 6 19:40:47 PST 2011
Larry. I have used a 600 VAC transfer switch from Sq. D I never had needed for it to be DC; however the insides are similar to the 600 VAC-VDC, it snaps open and snaps closed in both positions. I will ask my SQ D supplier, he is usually good.
BTW Nice idea, thanks.
DT
________________________________
From: "larry at starlightsolar.com" <larry at starlightsolar.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Sunday, November 6, 2011 1:45 PM
Subject: Re: [RE-wrenches] High Voltage MPPT units
With 4800 watts and HV input, it seems to me that a simple battery backup can be formed from an existing PV grid tie system. Block diagram attached. Where can one find a 600 volt rated DC transfer switch?
Larry
-------- Original Message --------
>Subject: Re: [RE-wrenches] High Voltage MPPT units
>From: John DeBoever <jdeboever at trojanbattery.com>
>Date: Sat, November 05, 2011 6:09 am
>To: "'re-wrenches at lists.re-wrenches.org'"
><re-wrenches at lists.re-wrenches.org>
>
>Todd,
>It is 2,560 Wp for 24V battery banks and 4,800 Wp for 48V battery banks.
>John
>
>
>From: toddcory at finestplanet.com [mailto:toddcory at finestplanet.com]
>Sent: Saturday, November 05, 2011 12:42 AM
>To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
>Subject: Re: [RE-wrenches] High Voltage MPPT units
>
> what is the max wattage the unit can handle? (it can't be 80 X 600?)
>todd
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20111106/79e4830c/attachment-0003.html>
More information about the RE-wrenches
mailing list