[RE-wrenches] Voltage Regulator

[John DeBoever]

Jeremy,

I understand that your application wants the wireless communication load to operate at 24VDC with a voltage tolerance of +-4V (15%).  Since your battery bank will operate between voltages larger than +-15%, you will need typically  22-30V/24V  DC/DC converter with max 15% voltage tolerance output, wired between your 24V configured battery bank DC output and your wireless communication load.
Some DC/DC converter OEM suggestions that offer tighter voltage tolerances (0.5 to 1%):
http://analyticsystems.com/products/dc_convert/

http://www.meanwelldirect.co.uk/products/200W-24V-Input-Single-Output-DC-DC-Converter/SD-200B-Series/default.htm
John
John F. DeBoever
Global Technical Director - Renewable Energy
Trojan Battery Company

12380 Clark Street
Santa Fe Springs, CA 90670
Tel: +1-562-236-3000 Ext. 3139
Fax: +1-562-236-3239
jdeboever at trojanbattery.com<mailto:jdeboever at trojanbattery.com>
www.trojanbattery.com<http://www.trojanbattery.com/>


From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of All Solar, Inc.
Sent: Thursday, November 03, 2011 6:27 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] Voltage Regulator

Hello,
I have a client running wireless comm. equipment that he would like to run from a 24vdc battery bank.  Even though it will operate either 12vdc or 24vdc, he would like to maintain 24vdc +/- 4v.  Any ideas out there would be helpfull.

Jeremy

All Solar Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com<http://www.asolarelectric.com>
Phone 719-372-3808
Fax 719-372-3804
Email allsolar at scswifi.net<mailto:allsolar at scswifi.net>
Email allsolar at live.com<mailto:allsolar at live.com>


This e-mail message and any attachments that accompany it may contain 
information that is confidential, privileged, or protected from disclosure.  
It is intended solely for the use of the individual(s) to whom it was intended 
to be addressed. If you have received this e-mail by mistake, or you are not 
the intended recipient, any reading, disclosure, copying or other use of this 
communication is strictly prohibited.  If you have received this communication 
in error, please immediately advise the sender at their phone number listed 
above, or by electronic mail, and also permanently delete the original and all 
copies of this e-mail and any attachments from all locations. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20111104/19e1c983/attachment-0003.html>