[RE-wrenches] Instruction manual / User interface rant

[PRP]

 Magnum with the standard control.
Have yet to have a end user mess it up that can't be fixed with a phone call. 

In fact with over 8 systems out there only one customer that has had any problems at all. 

-- 
Pine Ridge Products LLC
1646 East Highwood Rd
Belt, MT 59412

www.pineridgeproducts.com
www.chinookturbines.com


On Monday, October 17, 2011 at 10:23 -Oct 17, William Miller wrote:

> Mark:
> 
>  The XW SCP is no picnic either.  Are there any off-grid inverters with a decent user control panel?
> 
>  William
> 
>  At 08:25 PM 10/17/2011, you wrote:
> > I am in full agreement.
> >  The Outback remote darn near needs a college degree to operate.
> >  The sensitive parameters you mentioned should be in the password protected area.
> > 
> >  Mark
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org (mailto:RE-wrenches at lists.re-wrenches.org)
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm (http://www.re-wrenches.org/etiquette.htm)
> 
> Check out participant bios:
> www.members.re-wrenches.org (http://www.members.re-wrenches.org)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20111018/a834567d/attachment-0003.html>