[RE-wrenches] Leaving metal roofs?

[Carl Adams]

Jesse,
Another good option is the Soladeck.  If you don't splice inside it you can
actually hide it under the array, making an uber clean look.  Seal it down
with Eternabond or similar product.

Carl
On Sep 10, 2011 7:14 PM, "Christopher Warfel" <
cwarfel at entech-engineering.com> wrote:
> Many products out there. One way is to use a flashed/sealed utility
service entrance masthead. Works well if you can run the short distance from
the array to the masthead with the conductors off the roof.
>
> <br><br><br>------- Original Message -------
> On 9/10/2011 10:10 PM Jesse Dahl wrote:<br>All,
> <br>
> <br>What have people found to be the best way to get PV conductors off a
metal roof? The last one I worked on I entered the building through the wall
using LB's.
> <br>
> <br>Jesse
> <br>
> <br>Sent from my iPhone
> <br>_______________________________________________
> <br>List sponsored by Home Power magazine
> <br>
> <br>List Address: RE-wrenches at lists.re-wrenches.org
> <br>
> <br>Options & settings:
> <br>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> <br>
> <br>List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> <br>
> <br>List rules & etiquette:
> <br>www.re-wrenches.org/etiquette.htm
> <br>
> <br>Check out participant bios:
> <br>www.members.re-wrenches.org
> <br>
> <br><br><br>Christopher Warfel, ENTECH Engineering, Inc.
> PO Box 871, Block Island, RI 02807, 401-466-8978 (v)(f)
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110910/8186ac64/attachment-0003.html>