[RE-wrenches] SIlicon energy modules

[toddcory at finestplanet.com]

So I have to get factory training to install these??? It will be on a ~4/12 comp roof.
 
Todd
 
 
 
On Wednesday, July 27, 2011 10:34pm, "Alex Cozine" <acdc.cozine at gmail.com> said:



Yes I have installed these modules.  Yes they do have a proprietary racking system.  To buy these modules  I believe the manufacture wants you to do some onsite training to show you the ins and outs.  Basically, its four foot on center attachments to the racking put up loose until you add the module to the racking frame.  Then tighten down to move to the next module.

Are you planning a roof mount? metal roof w/ s5's?
or ground mount?

Check out my website to see some installations



On Wed, Jul 27, 2011 at 10:08 PM,  <[mailto:toddcory at finestplanet.com] toddcory at finestplanet.com> wrote:

Have you installed these Alex? I have specified them for a upcoming, local, grid-tied system here in heavy snow country because there is no frame to peel off from ice dams. The mounting system looks highly complicated/confusing. Can you (or any other list members who have worked with these) share with me your installation experience?
 
Thanks,
 
Todd
 


-- 
Alex Cozine
NABCEP Certified Solar PV Installer™

Brothers Electric & Solar
[http://brotherselectricsolar.com] brotherselectricsolar.com


Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110728/537a840d/attachment-0003.html>