[RE-wrenches] Torque Wrenches

The Solar Powered Office of Tom Duffy tom at thesolar.biz
Sun Jul 10 20:21:01 PDT 2011


Snap On... and I believe they will calibrate it for free for life
 

  Tom Duffy

  Systems Design Engineer



     tom at thesolar.biz

       575-539-2111 X 301

Although no trees were killed in the sending of this message, a large number
of electrons were terribly inconvenienced.


 

Confidentiality Notice: This message including any attachments is for the
sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender and delete any copies of this message.

 

  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jason
Szumlanski
Sent: Friday, July 08, 2011 7:02 AM
To: RE-wrenches
Subject: [RE-wrenches] Torque Wrenches



I'm looking for a recommendation on a good torque wrench for installing S-5
clamps. I saw the past posts on torque screwdrivers, but I'm looking for a
wrench calibrated to the 100-150 in-lbs range.

 

Jason Szumlanski

Fafco Solar

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110710/2be33c67/attachment-0003.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 4345 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110710/2be33c67/attachment-0003.jpg>


More information about the RE-wrenches mailing list