[RE-wrenches] Torque Wrenches

[Ray Walters]

I've been using Sears's inch pound torque wrench for many years. Gets 
the job done, and is reasonably priced.
Very good idea to use one for S5 clamps. I use it for a final check on 
all module mounting bolts, and then put a paint mark on the bolt head 
and side to indicate it has been torqued.

Ray Walters

On 7/8/2011 7:01 AM, Jason Szumlanski wrote:
>
> I'm looking for a recommendation on a good torque wrench for 
> installing S-5 clamps. I saw the past posts on torque screwdrivers, 
> but I'm looking for a wrench calibrated to the 100-150 in-lbs range.
>
> Jason Szumlanski
>
> Fafco Solar
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options&  settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules&  etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110708/16ec21b2/attachment-0003.html>