[RE-wrenches] Xantrex 3 XW system bypass
William Miller
william at millersolar.com
Mon May 16 16:40:36 PDT 2011
Jason:
I faced a similar dilemma when I installed my first triple XW system. The
dilemma had two aspects: 1. How can I configure the system to allow the
customer to manually bypass with either the generator or the grid inputs?
and 2. How can I fit all of the input and output circuit breakers required
for a grid and generator system into one XW I/O cabinet?
I came up with a design that solved both problems. Then I discovered
another dilemma: 3. How can I market this design?
William Miller
At 01:34 PM 5/16/2011, you wrote:
>I am looking for an external output bypass assembly for a Xantrex 3 x
>XW4024 system. My customer wants to be able to completely bypass the
>inverter output and operate loads straight from the grid - similar to
>what can be done in an Outback FlexWare system with their I/O bypass
>assemblies.
>
>This customer just wants the option of running loads direct from
>utility. It has nothing to do with the inverter input side.
>
>Any off-the-shelf solutions out there?
>
>Jason Szumlanski
>Fafco Solar
>
>
>
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 10.0.1375 / Virus Database: 1435/3641 - Release Date: 05/16/11
William Miller
Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110516/52277bfc/attachment-0003.html>
More information about the RE-wrenches
mailing list