[RE-wrenches] TED CT voltages. Egauge

[Darryl Thayer]

Hi does anyone know what the TED current transformer voltage is?  I am quiting 
my TED attempts and going over to  Egauge, does anyone know is the TED based on 
0.333 volts full scale?  I have asked them three times and they never answer.  I 
was hoping to salvage the CTs and use on Egauge.  

Thank you
Darryl




________________________________
From: Jesse Dahl <dahlsolar at gmail.com>
To: "RE-wrenches at lists.re-wrenches.org" <RE-wrenches at lists.re-wrenches.org>
Sent: Sat, May 7, 2011 7:21:43 PM
Subject: [RE-wrenches] Working on metal roofs.

Wrenches,

I will be installing multiple arrays on metal roofs at a local community college 
and am wondering about tying off.  Most of the work will be done off of scaffold 
and JLGs, but there will be times I will have to access upper portions of the 
roof.  I am looking at two arrays that will be installed on standing seam roofs 
both with a 12/12 pitch.  


How have people been working safely on roofs like this?



As always, I really appreciate all the help.



Jesse

Sent from my iPad!!!
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110507/e5e6b420/attachment-0003.html>