[RE-wrenches] SLDs with Mac

Dave Click daveclick at fsec.ucf.edu
Sat Apr 9 09:40:03 PDT 2011


Nick, you can still use Visio/AutoCAD on the Mac if you install 
Parallels or VMWare, which allow you to run Windows programs. Either of 
those would run you about $80, which is cheaper than OmniGraffle. Each 
of these three software packages have trial versions so you can check 
them out before you commit.

On 2011/4/8 7:55 PM, Nick Soleil wrote:
> Hello Mac Users:
> I have been using Visio Professional for my Single Line Diagrams, but am
> considering a change to Mac. Can I open or edit Visio diagrams with any
> Mac applications? Probably not. What programs are available for
> generating electrical diagrams? Have you used OmniGraffle? It seems
> really user friendly.
> What about AutoCAD for Mac?
> Nick Soleil
> 707-321-2937
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options&  settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules&  etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>



More information about the RE-wrenches mailing list