[RE-wrenches] EnPhase male whips

[Chad Waits]

We cut the extensions all the time to jump from deck to deck. You used to
have to have the proper pin out schematic to pair the proper wires but now
they're labeled L1,L2,L3, and then a green yellow wire for neutral. Just cap
the L3 if you're not using it for 3 phase.

 

Best, 

 

Chad Waits

Net Zero Solar

520.270.4873

chadwaits at netzerosolar.net

 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Eric Thomas
Sent: Thursday, January 20, 2011 12:06 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] EnPhase male whips

 

I know its a funny title but....why doesn't EnPhase make whips with male
connectors? We are having trouble laying out a system with multiple sub
arrays. We need to cable to sub arrays that are on different roof planes in
order to make up our circuits. From 5 micros on roof one, into attic, out of
SolaDeck on roof two, grab 3 more micros, back into SolaDeck, into attic for
home run. The whip from the SolDeck to the last 3 micros needs to be male...
any suggestions? EnPhase does not want us to cut an extension that has
connectors on both ends...

Thanks, 
Eric Thomas 
Solar Epiphany
Seattle

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110120/1070e2dc/attachment-0003.html>