[RE-wrenches] Sharp modules

[Kirpal Khalsa]

Happy Friday.....so i was installing some sharp 240w modules today and
noticed again that the modules do not have any sealant between the glass and
the aluminum frame.....I have noticed this on the 216's and the 80's as
well.....the glass and cells all seem to float independent of the
frame......all other modules we have used have a sealant sometimes too much
in the groove surrounding the glass inside of the frame.....
As we were installing the modules we noticed significant 1/4"+ of variance
in frame dimensions from one end of module to other, with mid clamps holding
the modules on one side you could pull the frame and it would move
independently of the glass......
Does this manufacturing method have some advantages that i am not aware of?
It just seemed odd that the glass and silicone cells and backing encapsulant
can all move around without being held firmly in place......we are new to
using the sharp modules and was interested to see if anyone else had any
insight into this design....
Cheers.

-- 
Sunny Regards,
Kirpal Khalsa
NABCEP Certified Solar PV Installer
Renewable Energy Systems
www.oregonsolarworks.com
541-218-0201 m
541-592-3958 o
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110909/8b78e73d/attachment-0002.html>