[RE-wrenches] To insulate a battery bank
frenergy
frenergy at psln.com
Fri Dec 10 22:24:39 PST 2010
----- Original Message -----
From: Darryl Thayer
To: RE-wrenches
Sent: Friday, December 10, 2010 8:00 AM
Subject: Re: [RE-wrenches] To insulate a battery bank
I have always been concerned with both high and low temperature. On case of a battery bank failure it was insulated with 1.5 inch foam (no acid problems) but the battery melted I think from thermal runaway and
--- On Fri, 12/10/10, bob ellison <reellison at gmail.com> wrote:
From: bob ellison <reellison at gmail.com>
Subject: Re: [RE-wrenches] To insulate a battery bank
To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
Date: Friday, December 10, 2010, 5:32 AM
With the amount of lead in a battery bank it changes temperature very slowly. Both gaining and losing heat is a very slow process.
I have never insulated battery banks, if in a cold area like here we size them larger for the slower reaction time in the winter anyway. Part of the reason being that I would bet that the acid would raise hell with the insulation!
We regularly see battery banks that are 40 degrees or so it presents no problem.
If the exhaust fan is running in a 70 degree building all it does is draw the warm air over the top of the battery and not really warm them much anyway, in an unheated building it will probably not make much difference.
The only way that I would put insulation in an unheated battery box is on the outside of the plywood, away from the acid and gasses. I would also make it removable in the summer.
----------------------------------------------------------------------
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1170 / Virus Database: 426/3305 - Release Date: 12/09/10
-----Inline Attachment Follows-----
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101210/3a1f6d4b/attachment-0004.html>
More information about the RE-wrenches
mailing list