[RE-wrenches] Padded equipment cases.

[R Ray Walters]

http://www.tecratools.com/ is a decent company to work with.

I've been pretty happy with both of my tool cases I've gotten from them. I used the tool back pack for years, and recently got a padded flight case with tool pallets, meters are padded in the bottom.

R. Walters
ray at solarray.com
Solar Engineer




On Aug 12, 2010, at 6:01 AM, Peter Parrish wrote:

> I seem to remember reading about a source of "custom padded equipment
> cases", but can't remember when and where I did so. What I am talking about
> is a sturdy (e.g. Al) case with closed cell foam in the top and bottom
> halves and then a third inner 2" or 3" layer of foam with cutouts for
> sensitive equipment. I am thinking of our DayStar irradiance meter, our
> SunEye, DMM, IR thermometer, clamp-on ammeter, digital camera and the like.
> 
> I am not interested in buying a "kit". I would like to specify the outlines
> for each piece of equipment and have the cutouts done in a professional
> manner.
> 
> Has anyone ordered one or know of a source?
> 
> - Peter
> 
> 
> Peter T. Parrish, Ph.D., President
> California Solar Engineering, Inc.
> 820 Cynthia Ave., Los Angeles, CA 90065
> CA Lic. 854779, NABCEP Cert. 031806-26
> peter.parrish at calsolareng.com  
> Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
> 
>  
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
>