[RE-wrenches] SMA6000U and GT 3.0 FAILURES
Nick Soleil
nicksoleilsolar at yahoo.com
Thu Jun 10 23:48:05 PDT 2010
Aloha Wrenches:
I have been surprised how much equipment has been failing in and out of warranty.
- I have recently been put in the unfortunate situation of
replacing Sunny Boys that have been dying just out of warranty
- I just placed the 50th dead BP module into my module graveyard.
- I have been replacing SMA and Xantrex inverters left and right
(three more dead inverters yesterday)
- Enphase communication issues. Recently, it has been taking 20-40 minutes to reach Enphase customer service
This is getting out of hand and taking too much of our staffs time.
Have any of you installed the new GT inverters that just came out?
They now have a new, larger disconnect enclosure at the bottom of the
inverter, and have the guts from the Square D HU-361-RB disconnect
inside, with the disconnect handle coming out of it. Perhaps Schneider
may be able to work through the bugs that have plagued the GTs.
Nick Soleil
Project Manager
Advanced Alternative Energy Solutions, LLC
PO Box 657
Petaluma, CA 94953
Cell: 707-321-2937
Office: 707-789-9537
Fax: 707-769-9037
________________________________
From: i2p <i2p at aol.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Thu, June 10, 2010 4:45:51 PM
Subject: Re: [RE-wrenches] GT 3.0 FAILURES
On Jun 9, 2010, at 10:47:43 AM, "August Goers" <august at luminalt.com> wrote:
maybe Xantrex has fixed it by now?
Unlikely, since I continue to replace several sites a 2nd and in one case three times.
Don L
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100610/5f96c605/attachment-0004.html>
More information about the RE-wrenches
mailing list