[RE-wrenches] FSEC Approval Required for Permit?

[Dave Click]

Jason, I don't believe that you're working with correct information and 
I'm not sure who you spoke with here at FSEC. Please contact me offlist 
so we can discuss this further.

Also, we'd be pretty excited to learn that you were installing 200 
systems in the state. Carry on!

-------- Original Message --------
Subject: [RE-wrenches] FSEC Approval Required for Permit?
From: Jason Szumlanski <Jason at fafcosolar.com>
To: re-wrenches at lists.re-wrenches.org
Date: 2010/6/3 09:57

> Hi Wrenches,
>
> Has anyone dealt with a jurisdiction that requires FSEC or similar
> system approval as a prerequisite for obtaining a PV permit? Although we
> have installed many systems in a particular jurisdiction in our area,
> they just rejected a permit application because we do not have an FSEC
> system certification on this system (24 Enphase microinverters). We are
> having a hard time getting them to explain from where the requirement
> came. It seems like a nonsense roadblock to me. I can't imagine what
> purpose an FSEC certification would serve in the case of microinverters.
> As long as you are using a module on Enphase's compatibility list and
> the module itself has FSEC certification, can you think of any logical
> reason to jump through this hoop?
>
> On that note, I contacted FSEC to see what it would require to certify
> Enphase microinverter systems. They are telling me that we would have to
> apply for one system, and then apply for "similar" systems if the number
> of inverters changes. That doesn't make any sense to me. Are we supposed
> to submit applications for 1, 2, 3...50...150 module systems? I doubt
> they have time to deal with the paperwork for hundreds of similar system
> applications. Imagine dropping 200 similar system applications in their
> inbox to cover all quantities of microinverters.
>
> Jason Szumlanski
> Fafco Solar
> Cape Coral, FL
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options&  settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules&  etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>