[RE-wrenches] Amphenol Helios as MC4 substitute
jay peltz
jay at asis.com
Sun Apr 11 07:37:56 PDT 2010
HI Rebekah,
The most amazing thing is that the tool is only $100 even on this site.
Since the parts are interchangeable, then does this tool work for the MC as well?
jay
peltz power
On Apr 11, 2010, at 5:38 AM, Rebekah Hren wrote:
> Hi Wrenches,
> After the MC4 shortage update a few weeks back I started scouting for parts.
> Amphenol showed up as a compatible connector that can mate with MC4 - apparently Suntech d series modules are switching to Amphenol.
>
> Has anyone used/seen these? What do you think the implications might be for connecting an MC4 to a non MC4 (supposedly these mate perfectly and have been tested to have no higher resistance than MC4 to MC4)?
>
> Here's a supplier page: http://sg.farnell.com/jsp/level5/module.jsp?moduleId=en/543752.xml
>
> I have a pdf of the announcement from Suntech with more info, can email on request.
> Thanks,
> Rebekah Hren
> Durham NC
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100411/bf71470b/attachment-0004.html>
More information about the RE-wrenches
mailing list