[RE-wrenches] single string of batts: must the interconnects	beinverter size cables?
    Warren Lauzon 
    windsun at wind-sun.com
       
    Fri Feb 19 11:18:26 PST 2010
    
    
  
In your case, yes the battery cables should also be 4/0. They are carrying the same load as the inverter cables. Max amp rating on 2/0 is around 190 amps, and that inverter can surge to well over 250, even though at 4kw it would pull around 180.
And a nitpick - those  are not cells, they are batteries. Each battery has 6 cells.
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun Since 1979
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
..................................................................................................
  ----- Original Message ----- 
  From: Mick Abraham 
  To: RE-wrenches 
  Sent: Friday, February 19, 2010 12:01 PM
  Subject: [RE-wrenches] single string of batts: must the interconnects beinverter size cables?
  Example: 12 two volt battery cells in one 24 volt string. 4kW inverter/charger has 250 amp DC breaker size and 4/0 cables...as the inverter folks would want.
  So...do the "cell to cell" interconnect cables have to also be 4/0? In the example above, 2/0 interconnects would suffice from the standpoint of basic safety...and even from the voltage drop standpoint...right?
  Inverter company people may be best qualified to answer this, but any replies will be appreciated. While I'm at it: do the inverter folks request oversize cables because they want more capacitance on the DC input...or what?
  Jolliness,
  Mick Abraham, Proprietor
  www.abrahamsolar.com
  Voice: 970-731-4675
------------------------------------------------------------------------------
  _______________________________________________
  List sponsored by Home Power magazine
  List Address: RE-wrenches at lists.re-wrenches.org
  Options & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
  List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm
  Check out participant bios:
  www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100219/1c778aa3/attachment-0004.html>
    
    
More information about the RE-wrenches
mailing list