[RE-wrenches] Industrial battery chargers

Drake drake.chamberlin at redwoodalliance.org
Tue Dec 28 06:51:29 PST 2010


I've been through this one, to balance the third 
leg of a 3 phase generator which has a pair of 
stacked SW4024s on it.  After a long search of 
the available industrial chargers, we added 
another SW4024.  The system had certain heavy 
surge loads, which we put on a special panel powered  by the third inverter.

For the money, I think another inverter is the 
best bet.  Maybe Chinese imports may change the 
situation, but if you want to stay away from 
them, another inverter would likely still be your most economical choice.

At 06:13 PM 12/27/2010, you wrote:
>Hello battery wrenches,

Drake

>
>I am looking for recommendations for an 
>industrial grade battery charger for our shop. 
>Most of what I am finding is in India, China or 
>Germany but I would like something a little 
>closer to home. I am looking for these features:
>    * automatic 3 stage charging selectable for 
> 6 or 12 volt AGM, flooded or GEL
>    * manual adjustable voltage control up to 20+ Vdc
>    * manual adjustable current limiter 1 to 50+ amps
>    * adjustable timer shut off
>Thanks,
>
>Larry Crutcher
>General Manager
><http://www.starlightsolar.com>Starlight Solar Power Systems
>11881 S Fortuna Road, #210
>Yuma, AZ 85367
>
>Phone
>(928) 342-9103
>
>powered by STARLIGHT™
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101228/2d2411a1/attachment-0003.html>


More information about the RE-wrenches mailing list