[RE-wrenches] To insulate a battery bank DEPENDS on a lot of factors.
jay peltz
jay at asis.com
Mon Dec 13 16:30:03 PST 2010
Hi Dana,
The manufacturers that I've read, do say they should be in a vented enclosure.
But your point is taken,
thanks,
jay
On Dec 13, 2010, at 8:32 AM, Dana wrote:
> Sealed batteries do not require a vent , therefore no air passage – less influence of ambient exterior temps to the bank. Perhaps on a small bank this would have an influence.
> On a large bank in a low usage scenario, IE: second home with no one home, the system may be full by 10AM and the fan runs for most of the day inducing cool air.
>
> Granted most systems have a present [physically] home owner. I have many systems that float for a good part of the winter, awaiting the arrival of either the owner for a week or spring.
>
> Dana Orzel
> Great Solar Works, Inc
> E - dana at solarwork.com
> V - 970.626.5253
> F - 970.626.4140
> C - 970.209.4076
> web - www.solarwork.com
>
> "Responsible Technologies for Responsible People since 1988"
> Do not ever belive anything, but seriously trust through action.
>
> From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay peltz
> Sent: Sunday, December 12, 2010 4:49 PM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] To insulate a battery bank DEPENDS on a lot of factors.
>
> HI Dana,
>
> I'm curious about why you differentiate sealed vs. flooded batteries?
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101213/75e79e9e/attachment-0003.html>
More information about the RE-wrenches
mailing list