[RE-wrenches] Boiler on SW inverter
Peter Talmage
ptalmage at yahoo.com
Thu Nov 4 07:16:40 PDT 2010
Hi Dana,
Thanks for the info. I hate to have to eat a boiler that won't work !
Yours, Peter
--- On Wed, 11/3/10, Dana <dana at solarwork.com> wrote:
From: Dana <dana at solarwork.com>
Subject: [RE-wrenches] Boiler on SW inverter
To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
Date: Wednesday, November 3, 2010, 3:35 PM
Peter
–
I
have operated Triangle Tube, NTI, Munchkin, Gold Weil-McLain, and Teledyne-Lars
on the SW series and no issues.
The
only issue I have seen is forced hot air system with Rogers White controllers,
the end decision was the RW controller did not like how the sine wave crossed
the X axis. Not that Forced air is a responsible heat option, some folks
[contractors] do not listen.
Thanks,
Dana Orzel
Great
Solar Works, Inc
E -
dana at solarwork.com
V -
970.626.5253
F -
970.626.4140
C -
970.209.4076
web
- www.solarwork.com
"Responsible
Technologies for Responsible People since 1988"
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Peter
Talmage
Sent: Wednesday, November 03, 2010 1:29 PM
To: RE-wrenches
Subject: [RE-wrenches] Boiler on SW inverter
Has anyone had any experiences operating a Triangle Tube
Prestige boiler on a Trace SW 4024 inverter? Is the wave form clean enough to
not "confuse" the electronics? Years back I operated a Polaris
condensing water heater with a Trace and had no problems.
Thanks, Peter
-----Inline Attachment Follows-----
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101104/72504b42/attachment-0003.html>
More information about the RE-wrenches
mailing list