[RE-wrenches] The perfect solar ready roof

[North Texas Renewable Energy Inc]

MessageAfter re-reading your original letter Chris, it sounds like the roof
makeover hasn't happened yet. If that's the case suggest to the owner that,
based on the 100 years or so of combined professional experience of the PV
installer community, he should not use the engineered rafters or the 1/2"
decking if he's wanting PV on top.
Pull out a copy of the International Building Code and show him.

not a roofer,

Jim Duncan

 Dear Wrenches
 have a composite (shingle) roof at hand, and the owner wants to upgrade it
to a metal roof and install a 5kw+ array on it.   The rafters are those
(sort of) particle board I-beams covered with 1/2" plywood (and shingles).
What's the best metal roofing you could suggest--and would you beef up the
wood to lag into?
      Thanks for all your input.
      Chris Daum
      Oasis Montana Inc.
      406-777-4309
      406-777-0830 fax
      _______________________________________________
      List sponsored by Home Power magazine

      List Address: RE-wrenches at lists.re-wrenches.org

      Options & settings:
      http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

      List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

      List rules & etiquette:
      www.re-wrenches.org/etiquette.htm

      Check out participant bios:
      www.members.re-wrenches.org



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101020/385f2e44/attachment-0003.html>