[RE-wrenches] paralleling FM-60's
jay peltz
jay at asis.com
Wed Oct 20 12:16:10 PDT 2010
Hi Jeff,
Its not the voltage but amps, the apollo is only 80amps, and the old MX's you can push to 70 so no real advantage there.
j
On Oct 20, 2010, at 11:26 AM, Jeff Oldham wrote:
> I think you run a very high risk of smoking the controllers. So rather than waste the money, gear and potential fire I would suggest using either a Apollo HV-80 (200Voc) or the brand new Schneider/Xantrex 600Voc controller - the new holy grail of controllers! Then rewire the array accordingly.
>
> Good luck!
>
> -jeff o
>
>
> From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions
>
> ____________________________________________________________
> Hate Carrying Pet Food?
> Now you don't have to! Pet sites deliver to your door for free!
> PetConsumers.com_______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101020/5b718b1d/attachment-0003.html>
More information about the RE-wrenches
mailing list