[RE-wrenches] Mounting Enphase when using S-5-PV Clamps

[toddcory at finestplanet.com]

I have the same question, only regarding pole mounts.

Todd

On Wednesday, October 20, 2010 8:06am, "benn kilburn" <benn at daystarsolar.ca> said:

Mornin,


I'm looking at mounting an Enphase M190 system on a standing seam metal roof and was considering using the S-5-PV clamps (as opposed to just the S-5's and L-feet), which do not use any mounting rails.  No rails means no where to properly mount the M190's!?!
It was suggested to mount the M190's to each module frame using a fashioned L-bracket, makes sense, but this would require drilling holes in the module frame, and wouldn't that void the module warranty?  
Also, am i the only one who is wondering if hanging a 4.4 pound inverter off of the module frame will potentially cause some sagging/deformation of the frame over the life of the system?  Is this how those "andalay" modules support their inverters? 


thanks,
benn

DayStar Renewable Energy Inc. 

benn at daystarsolar.ca
780-906-7807 
HAVE A SUNNY DAY



 		 	   		  


Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20101020/ba3673f1/attachment-0003.html>