[RE-wrenches] Grundfos SQ Flex Float Switch
Bob-O Schultze
bob-o at electronconnection.com
Mon Aug 23 17:44:57 PDT 2010
Hiya Kirpal,
They are just signal wires from the CU200.
Cheers, Bob-O
On Aug 23, 2010, at 1:54 PM, Kirpal Khalsa wrote:
Hi All.....I can't find it in any of the manuals for grundfos.....does anyone know if the wiring to the float switch carries current or not. The float switch has 3 #14AWG wires.......I need to add about 700 feet of wire from the CU 200 controller to the storage tank.....I want to use #18AWG......is this okay? most float switches I have used do not carry current they are simply signal wires and can use very small gauge for long distance.....
Anyone know off the top of their head?
Thanks....
--
Sunny Regards,
Kirpal Khalsa
NABCEP Certified Solar PV Installer
Renewable Energy Systems
www.oregonsolarworks.com
541-218-0201 m
541-592-3958 o
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100823/55cce25d/attachment-0003.html>
More information about the RE-wrenches
mailing list