[RE-wrenches] Taping Splices/Tees

[Peter Parrish]

Can anyone give me the NEC reference for taping UL-listed wire splice
connectors (indoors)? Does the tape need to be UL listed? Anything else that
pertains? 
 
- Peter
 
Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parrish at calsolareng.com  
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885

 
  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of William
Miller
Sent: Friday, April 23, 2010 11:26 PM
To: RE-wrenches
Subject: [RE-wrenches] Inter-row shading, additional information
 
Friends:

I was incorrect on one point in my previous post on the subject.  The
SolarWorld SW230 is comprised of one series string of cells.  It acts
somewhat like there are three strings because of the bypass diodes. If you
shade one cell of one group, the bypass diodes kick in and allow the module
to continue to produce power but at a reduced level.

Our test showed that if the short edge is shaded for more than half of a
cell width on the narrow edge, the total output caved.  The same shading on
the long edge reduced output minimally.

William Miller





Please note new e-mail address and domain:

William Miller 
Miller Solar
Voice :805-438-5600
email: william at millersolar.com
http://millersolar.com <http://millersolar.com/> 
License No. C-10-773985
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100424/f796c782/attachment-0003.html>