[RE-wrenches] Overvoltage Sensor for 48V Battery Bank
Darryl Thayer
daryl_solar at yahoo.com
Fri Oct 2 12:41:33 PDT 2009
david katz supplied one configuration to the list
dt
--- On Fri, 10/2/09, Peter Parrish <peter.parrish at calsolareng.com> wrote:
> From: Peter Parrish <peter.parrish at calsolareng.com>
> Subject: [RE-wrenches] Overvoltage Sensor for 48V Battery Bank
> To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
> Date: Friday, October 2, 2009, 12:44 PM
>
>
>
>
>
> Message
>
>
>
>
>
>
>
>
>
>
> I seem to have
> lost the email that recommended a battery
> sensor that can function in a high-voltage disconnect
> system. We have a 48V battery
> bank as part of an AC coupled Grid-Tied Battery Backup
> System and I have
> already installed a N/C 2P relay on the output of the
> SB3000 inverter. So all I
> need is a sensor that will provide a 12Vdc signal to the
> relay coil at the HV
> set point.
>
>
>
> Someone was kind
> enough to recommend a unit and if they are
> reading this, please resend your
> recommendation!
>
>
>
> -
> Peter
>
>
>
>
>
> Peter T.
> Parrish, Ph.D., President
>
> California Solar Engineering, Inc.
>
> 820 Cynthia Ave., Los Angeles, CA 90065
>
> CA Lic. 854779, NABCEP Cert. 031806-26
>
> peter.parrish at calsolareng.com
>
>
> Ph 323-258-8883, Mobile 323-839-6108, Fax
> 323-258-8885
>
>
>
>
>
>
>
>
>
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
More information about the RE-wrenches
mailing list