[RE-wrenches] XW6048 parts problem

[jay peltz]

Hi Ezra,

How did it work in stand by mode?

I couldn't get one to work with 250 watts of 4' tubes, even at the  
lowest search setting.
I tried tech, but they only offered a link to old Trace "hard to use"  
items.

jay

peltz power
On Aug 5, 2009, at 5:48 AM, Ezra Auerbach wrote:

> Hi Folks,
>
> I had an XW on my off grid system for a number of months, at the  
> insistence of my partner it has been taken out and our old SW Plus  
> is back doing homestead power duty. The reason we took the XW out of  
> service was because it had an unreasonably high tare loss and it  
> didn't work well with our 3 kW Honda generators - it kept dropping  
> it off charge. I really liked the user interface but only with the  
> addition of the Remote Panel, the machine itself without the remote  
> would be a pain to operate. It was no surprise to learn that they  
> were made in China, but I tend to agree that small parts should be  
> available for this sort of product.
>
>
> Best regards,
>
> Ezra
>
> Ezra Auerbach
> DragonSun Consulting
> On 4-Aug-09, at 7:41 PM, jay peltz wrote: