[RE-wrenches] Fisher Paykal on a MAGNASINE

Jason Lerner wapalco at rockisland.com
Thu Jul 2 06:51:17 PDT 2009


Hi Dana,

I have run the Fisher-Paykal washer on a DR,  SW,  SW+, PS, Outback,  
Prosine 1000 and Magnum MMS1012 with no problems.  I stuffed a huge  
load in, and tried running it on a Morningstar SureSine 300 watt  
(surge to 600 for 10 minutes),  which has a quick blow 40 amp fused  
input inside the inverter.  I installed a 30 amp circuit breaker on  
the DC input which tripped in the very last cycle,  it very well may  
had finished the load with just the 40 amp fuse.

The hot/cold mixing valve has a low spot spot in the plastic casing,  
and we have had them freeze and crack in low temperatures.  The tech  
guys in New Zealand got a kick out of that since it was over 95º F the  
day we called.

I have not tried the Magna sine inverter though.

Best,

Jason Lerner
Waldron Power and LIght Co.


On Jul 1, 2009, at 4:19 PM, Dana wrote:

> Has anyone run a Fisher-Paykal washer on the Magna sine modified  
> sine wave 1200 watt inverter? Good to do or not?
>
> Thanks
>
> Dana Orzel
>
> Great Solar Works, Inc
> www.solarwork.com
> E - dana at solarwork.com
> V - 970.626.5253
> F - 970.626.4140
> C - 970.209.4076
> “I'd put my money on solar energy… I hope we don't have to wait 'til  
> oil and coal run out before we tackle that.”
> —Thomas Edison, in conversation with Henry Ford and Harvey  
> Firestone, March 1931
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090702/0349335d/attachment-0004.html>


More information about the RE-wrenches mailing list