[RE-wrenches] S5 attachment to Copper standing seam roof

[Jason Lombard]

For copper SS roofs S-5 has the brass clamps to prevent the metal mis-match
will not effect it. Conergy has them.

On Thu, Feb 19, 2009 at 12:04 PM, Carl Adams <swingjunkie at gmail.com> wrote:

> Wrenches,
>
> I'm bidding a job where I have a copper standing seam metal roof.  I'm
> thinking stainless steel S5 clips for attachment.  Has anyone sourced
> these and if so can you provide contact info?
>
> Regards
> Carl Adams
> NABCEP Certified PV Installer
> SunRock Solar LLC
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>


-- 
Jason Lombard
Open Hand Solar LLC.
Certified Sustainable Building Adviser
www.openhandsolar.com
505 795 8646

"I'd put my money on solar energy… I hope we don't have to wait 'til oil and
coal run out before we tackle that."

—Thomas Edison
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090219/0122ea67/attachment-0004.html>