[RE-wrenches] SS Tek Crews

[Jason Lombard]

Fastenall is a good source I have purchased from. Also Home Depot sells
them.

On Thu, Feb 5, 2009 at 3:51 PM, Peter Parrish <peter.parrish at calsolareng.com
> wrote:

> Does anyone have a source for stainless steel, self tapping Tek screws? I
> could use some #10/3-4 and #10/1-1/2. If they have the little cap and
> neoprene washer that would be even better!
>
> - Peter
>
> Peter T. Parrish, President
> California Solar Engineering, Inc.
> 820 Cynthia Ave., Los Angeles, CA 90065
> Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
> CA Lic. 854779, NABCEP Cert. 031806-26
> peter.parrish at calsolareng.com
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>


-- 
Jason Lombard
Open Hand Solar LLC.
Certified Sustainable Building Adviser
www.openhandsolar.com
505 795 8646

"I'd put my money on solar energy… I hope we don't have to wait 'til oil and
coal run out before we tackle that."

—Thomas Edison
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090206/10ec79ee/attachment-0004.html>