[RE-wrenches] dpw top of pole mount pipe problems

[Dana]

RUNNN! 

 

Cast iron pipe was developed for on purpose, to carry sewage and PV is not
sewage.

 

Thanks -

 

Dana Orzel

 

Great Solar Works, Inc

www.solarwork.com

E - dana at solarwork.com

V - 970.626.5253

F - 970.626.4140

C - 970.209.4076

"I'd put my money on solar energy. I hope we don't have to wait 'til oil and
coal run out before we tackle that."

-Thomas Edison, in conversation with Henry Ford and Harvey Firestone, March
1931

 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of
ryan at solar4maine.com
Sent: Monday, February 02, 2009 9:41 AM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] dpw top of pole mount pipe problems

 

Wrenches i have a customer that wanted to install a dpw top of pole mount
for 18 sharp 180 watt panels. he installed his own pipe and even after
several reminders by me and a signed contract stating shcedule 80 8 inch
steel pipe he installed a 8 inch cast iron water main.

 

My dilemma is this he claims to wave my liability in this install but he has
been a very high maintnence customer and seems to forget everything we talk
about or he signs. so would you go ahead with the install or is the cast
iron going to shear off and the rack fall over?

 

financially i have met my obligations with the customer i can wave the labor
cost and tell him to find someone else at this point if need be i dont want
to be liable for spilling 18 panels on the ground and my insurance wouldnt
cover it as we went against dpw's recomendations

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090202/b047c390/attachment-0004.html>